Have you noticed that your Viking dishwasher does not dry as it used to? When a dishwasher isn’t performing up to par, it can get time-consuming, as you’re left with the extra task of hand-drying your dishes. But don’t lose hope! We’ll help you uncover the underlying causes of this all-too-common issue and provide you with practical solutions to get your dishwasher back to peak performance.
How to Troubleshoot When Your Viking Dishwasher Does Not Dry
In the following sections, we will delve into the various factors that may be contributing to why your Viking dishwasher does not dry, and offer guidance on how to address and rectify each issue, ultimately restoring your dishwasher’s ability to dry your dishes effectively and hassle-free.
Not Using Rinse Aid
Rinse aid plays a crucial role in helping your dishes dry quickly and without water spots. It works by reducing the surface tension of water, allowing it to spread evenly and drain off the dishes more efficiently, preventing water spots and streaks while promoting faster drying.
If you’re already using rinse aid, a malfunctioning dispenser could also be the reason behind your drying issues. Here’s what you need to do to check the rinse aid dispenser:
- Make sure you’re using the right amount and type of rinse aid
- Check the dispenser for clogs or leaks
- Refill or replace the dispenser as needed
Check the Heating Element
The heating element is responsible for generating heat inside the dishwasher during the drying cycle. If it’s not functioning properly, your dishes may not dry as expected. Here’s how to inspect and troubleshoot the heating element:
- Inspect for any damage or malfunction
- Test the heating element with a multimeter
- Replace the heating element if needed
Examine the High Limit Thermostat
The high-limit thermostat is a safety feature that prevents the dishwasher from overheating. If it’s faulty, it might not allow the dishwasher to reach the proper temperature and you’ll find your Viking dishwasher not drying. You’ll likely need a technician to help with these steps to assess the high-limit thermostat:
- Test the thermostat with a multimeter
- Replace the thermostat if it has failed
Assess the Door Vent and Fan Assembly
The door vent and fan help remove excess moisture from the dishwasher, promoting faster drying. If either component is not functioning correctly, your dishes may remain damp. To inspect and troubleshoot the door vent and fan assembly, follow these steps:
- Look for anything blocking the vent and for any damage
- Test the fan motor for proper function
- Replace or repair the vent and fan as necessary
Check the Dishwasher’s Drainage System
A properly functioning drainage system is essential for efficient drying. If water isn’t draining correctly, it could cause your dishes to stay wet. To evaluate and address any drainage issues, perform the following steps:
- Ensure proper installation of the drain hose and make sure it’s draining
- Clean the dishwasher’s filter and pump
- Check for clogs or damage in the drain system
Verify Proper Loading and Cycle Selection
Improper loading of dishes or selecting the wrong cycle can result in poor drying performance. To ensure optimal drying, consider these tips for loading and cycle selection:
- Choose the correct drying cycle for your dishes, and use a longer drying time if available
- Avoid overloading or overcrowding the dishwasher
When your Viking dishwasher does not dry it can be a real pain, but with the proper troubleshooting steps and maintenance, you can ensure that your dishwasher performs at its best. By checking the heating element, high limit thermostat, rinse aid dispenser, door vent and fan assembly, loading and cycle selection, and drainage system, you’ll be on your way to having a properly functioning dishwasher in no time. If you’re unable to identify or fix the issue, don’t hesitate to reach out to a professional technician for assistance.